/********************************** (C) COPYRIGHT *******************************
* File Name : ch32v20x_usb.h
* Author : WCH
* Version : V1.0.0
* Date : 2024/01/30
* Description : This file contains all the functions prototypes for the USB
* firmware library.
*********************************************************************************
* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd.
* Attention: This software (modified or not) and binary are used for
* microcontroller manufactured by Nanjing Qinheng Microelectronics.
*******************************************************************************/
#ifndef __CH32V20X_USB_H
#define __CH32V20X_USB_H
#ifdef __cplusplus
extern "C" {
#endif
/*******************************************************************************/
/* Header File */
#include <stdint.h>
/*******************************************************************************/
/* USB Communication Related Macro Definition */
#ifndef DEFAULT_ENDP0_SIZE
#define DEFAULT_ENDP0_SIZE 8 // default maximum packet size for endpoint 0
#endif
#ifndef MAX_PACKET_SIZE
#define MAX_PACKET_SIZE 64 // maximum packet size
#endif
/* USB PID */
#ifndef USB_PID_SETUP
#define USB_PID_NULL 0x00
#define USB_PID_SOF 0x05
#define USB_PID_SETUP 0x0D
#define USB_PID_IN 0x09
#define USB_PID_OUT 0x01
#define USB_PID_NYET 0x06
#define USB_PID_ACK 0x02
#define USB_PID_NAK 0x0A
#define USB_PID_STALL 0x0E
#define USB_PID_DATA0 0x03
#define USB_PID_DATA1 0x0B
#define USB_PID_PRE 0x0C
#endif
/* USB standard device request code */
#ifndef USB_GET_DESCRIPTOR
#define USB_GET_STATUS 0x00
#define USB_CLEAR_FEATURE 0x01
#define USB_SET_FEATURE 0x03
#define USB_SET_ADDRESS 0x05
#define USB_GET_DESCRIPTOR 0x06
#define USB_SET_DESCRIPTOR 0x07
#define USB_GET_CONFIGURATION 0x08
#define USB_SET_CONFIGURATION 0x09
#define USB_GET_INTERFACE 0x0A
#define USB_SET_INTERFACE 0x0B
#define USB_SYNCH_FRAME 0x0C
#endif
/* USB hub class request code */
#ifndef HUB_GET_DESCRIPTOR
#define HUB_GET_STATUS 0x00
#define HUB_CLEAR_FEATURE 0x01
#define HUB_GET_STATE 0x02
#define HUB_SET_FEATURE 0x03
#define HUB_GET_DESCRIPTOR 0x06
#define HUB_SET_DESCRIPTOR 0x07
#endif
/* USB HID class request code */
#ifndef HID_GET_REPORT
#define HID_GET_REPORT 0x01
#define HID_GET_IDLE 0x02
#define HID_GET_PROTOCOL 0x03
#define HID_SET_REPORT 0x09
#define HID_SET_IDLE 0x0A
#define HID_SET_PROTOCOL 0x0B
#endif
/* Bit Define for USB Request Type */
#ifndef USB_REQ_TYP_MASK
#define USB_REQ_TYP_IN 0x80
#define USB_REQ_TYP_OUT 0x00
#define USB_REQ_TYP_READ 0x80
#define USB_REQ_TYP_WRITE 0x00
#define USB_REQ_TYP_MASK 0x60
#define USB_REQ_TYP_STANDARD 0x00
#define USB_REQ_TYP_CLASS 0x20
#define USB_REQ_TYP_VENDOR 0x40
#define USB_REQ_TYP_RESERVED 0x60
#define USB_REQ_RECIP_MASK 0x1F
#define USB_REQ_RECIP_DEVICE 0x00
#define USB_REQ_RECIP_INTERF 0x01
#define USB_REQ_RECIP_ENDP 0x02
#define USB_REQ_RECIP_OTHER 0x03
#define USB_REQ_FEAT_REMOTE_WAKEUP 0x01
#define USB_REQ_FEAT_ENDP_HALT 0x00
#endif
/* USB Descriptor Type */
#ifndef USB_DESCR_TYP_DEVICE
#define USB_DESCR_TYP_DEVICE 0x01
#define USB_DESCR_TYP_CONFIG 0x02
#define USB_DESCR_TYP_STRING 0x03
#define USB_DESCR_TYP_INTERF 0x04
#define USB_DESCR_TYP_ENDP 0x05
#define USB_DESCR_TYP_QUALIF 0x06
#define USB_DESCR_TYP_SPEED 0x07
#define USB_DESCR_TYP_OTG 0x09
#define USB_DESCR_TYP_BOS 0X0F
#define USB_DESCR_TYP_HID 0x21
#define USB_DESCR_TYP_REPORT 0x22
#define USB_DESCR_TYP_PHYSIC 0x23
#define USB_DESCR_TYP_CS_INTF 0x24
#define USB_DESCR_TYP_CS_ENDP 0x25
#define USB_DESCR_TYP_HUB 0x29
#endif
/* USB Device Class */
#ifndef USB_DEV_CLASS_HUB
#define USB_DEV_CLASS_RESERVED 0x00
#define USB_DEV_CLASS_AUDIO 0x01
#define USB_DEV_CLASS_COMMUNIC 0x02
#define USB_DEV_CLASS_HID 0x03
#define USB_DEV_CLASS_MONITOR 0x04
#define USB_DEV_CLASS_PHYSIC_IF 0x05
#define USB_DEV_CLASS_POWER 0x06
#define USB_DEV_CLASS_IMAGE 0x06
#define USB_DEV_CLASS_PRINTER 0x07
#define USB_DEV_CLASS_STORAGE 0x08
#define USB_DEV_CLASS_HUB 0x09
#define USB_DEV_CLASS_VEN_SPEC 0xFF
#endif
/* USB Hub Class Request */
#ifndef HUB_GET_HUB_DESCRIPTOR
#define HUB_CLEAR_HUB_FEATURE 0x20
#define HUB_CLEAR_PORT_FEATURE 0x23
#define HUB_GET_BUS_STATE 0xA3
#define HUB_GET_HUB_DESCRIPTOR 0xA0
#define HUB_GET_HUB_STATUS 0xA0
#define HUB_GET_PORT_STATUS 0xA3
#define HUB_SET_HUB_DESCRIPTOR 0x20
#define HUB_SET_HUB_FEATURE 0x20
#define HUB_SET_PORT_FEATURE 0x23
#endif
/* Hub Class Feature Selectors */
#ifndef HUB_PORT_RESET
#define HUB_C_HUB_LOCAL_POWER 0
#define HUB_C_HUB_OVER_CURRENT 1
#define HUB_PORT_CONNECTION 0
#define HUB_PORT_ENABLE 1
#define HUB_PORT_SUSPEND 2
#define HUB_PORT_OVER_CURRENT 3
#define HUB_PORT_RESET 4
#define HUB_PORT_POWER 8
#define HUB_PORT_LOW_SPEED 9
#define HUB_C_PORT_CONNECTION 16
#define HUB_C_PORT_ENABLE 17
#define HUB_C_PORT_SUSPEND 18
#define HUB_C_PORT_OVER_CURRENT 19
#define HUB_C_PORT_RESET 20
#endif
/* USB HID Class Request Code */
#ifndef HID_GET_REPORT
#define HID_GET_REPORT 0x01
#define HID_GET_IDLE 0x02
#define HID_GET_PROTOCOL 0x03
#define HID_SET_REPORT 0x09
#define HID_SET_IDLE 0x0A
#define HID_SET_PROTOCOL 0x0B
#endif
/* USB CDC Class request code */
#ifndef CDC_GET_LINE_CODING
#define CDC_GET_LINE_CODING 0X21 /* This request allows the host to find out the currently configured line coding */
#define CDC_SET_LINE_CODING 0x20 /* Configures DTE rate, stop-bits, parity, and number-of-character */
#define CDC_SET_LINE_CTLSTE 0X22 /* This request generates RS-232/V.24 style control signals */
#define CDC_SEND_BREAK 0X23 /* Sends special carrier modulation used to specify RS-232 style break */
#endif
/* USB UDisk */
#ifndef USB_BO_CBW_SIZE
#define USB_BO_CBW_SIZE 0x1F
#define USB_BO_CSW_SIZE 0x0D
#endif
#ifndef USB_BO_CBW_SIG0
#define USB_BO_CBW_SIG0 0x55
#define USB_BO_CBW_SIG1 0x53
#define USB_BO_CBW_SIG2 0x42
#define USB_BO_CBW_SIG3 0x43
#define USB_BO_CSW_SIG0 0x55
#define USB_BO_CSW_SIG1 0x53
#define USB_BO_CSW_SIG2 0x42
#define USB_BO_CSW_SIG3 0x53
#endif
/*******************************************************************************/
/* USBFS Related Register Macro Definition */
/* R8_USB_CTRL */
#define USBFS_UC_HOST_MODE 0x80
#define USBFS_UC_LOW_SPEED 0x40
#define USBFS_UC_DEV_PU_EN 0x20
#define USBFS_UC_SYS_CTRL_MASK 0x30
#define USBFS_UC_SYS_CTRL0 0x00
#define USBFS_UC_SYS_CTRL1 0x10
#define USBFS_UC_SYS_CTRL2 0x20
#define USBFS_UC_SYS_CTRL3 0x30
#define USBFS_UC_INT_BUSY 0x08
#define USBFS_UC_RESET_SIE 0x04
#define USBFS_UC_CLR_ALL 0x02
#define USBFS_UC_DMA_EN 0x01
/* R8_USB_INT_EN */
#define USBFS_UIE_DEV_NAK 0x40
#define USBFS_UIE_FIFO_OV 0x10
#define USBFS_UIE_HST_SOF 0x08
#define USBFS_UIE_SUSPEND 0x04
#define USBFS_UIE_TRANSFER 0x02
#define USBFS_UIE_DETECT 0x01
#define USBFS_UIE_BUS_RST 0x01
/* R8_USB_DEV_AD */
#define USBFS_UDA_GP_BIT 0x80
#define USBFS_USB_ADDR_MASK 0x7F
/* R8_USB_MIS_ST */
#define USBFS_UMS_SOF_PRES 0x80
#define USBFS_UMS_SOF_ACT 0x40
#define USBFS_UMS_SIE_FREE 0x20
#define USBFS_UMS_R_FIFO_RDY 0x10
#define USBFS_UMS_BUS_RESET 0x08
#define USBFS_UMS_SUSPEND 0x04
#define USBFS_UMS_DM_LEVEL 0x02
#define USBFS_UMS_DEV_ATTACH 0x01
/* R8_USB_INT_FG */
#define USBFS_U_IS_NAK 0x80 // RO, indicate current USB transfer is NAK received
#define USBFS_U_TOG_OK 0x40 // RO, indicate current USB transfer toggle is OK
#define USBFS_U_SIE_FREE 0x20 // RO, indicate USB SIE free status
#define USBFS_UIF_FIFO_OV 0x10 // FIFO overflow interrupt flag for USB, direct bit address clear or write 1 to clear
#define USBFS_UIF_HST_SOF 0x08 // host SOF timer interrupt flag for USB host, direct bit address clear or write 1 to clear
#define USBFS_UIF_SUSPEND 0x04 // USB suspend or resume event interrupt flag, direct bit address clear or write 1 to clear
#define USBFS_UIF_TRANSFER 0x02 // USB transfer completion interrupt flag, direct bit address clear or write 1 to clear
#define USBFS_UIF_DETECT 0x01 // device detected event interrupt flag for USB host mode, direct bit address clear or write 1 to clear
#define USBFS_UIF_BUS_RST 0x01 // bus reset event interrupt flag for USB device mode, direct bit address clear or write 1 to clear
/* R8_USB_INT_ST */
#define USBFS_UIS_IS_NAK 0x80 // RO, indicate current USB transfer is NAK received for USB device mode
#define USBFS_UIS_TOG_OK 0x40 // RO, indicate current USB transfer toggle is OK
#define USBFS_UIS_TOKEN_MASK 0x30 // RO, bit mask of current token PID code received for USB device mode
#define USBFS_UIS_TOKEN_OUT 0x00
#define USBFS_UIS_TOKEN_IN 0x20
#define USBFS_UIS_TOKEN_SETUP 0x30
// bUIS_TOKEN1 & bUIS_TOKEN0: current token PID code received for USB device mode
// 00: OUT token PID received
// 10: IN token PID received
// 11: SETUP token PID received
#define USBFS_UIS_ENDP_MASK 0x0F // RO, bit mask of current transfer endpoint number for USB device mode
#define USBFS_UIS_H_RES_MASK 0x0F // RO, bit mask of current transfer handshake response for USB host mode: 0000=no response, time out from device, others=handshake response PID received
/* R32_USB_OTG_CR */
#define USBFS_CR_SESS_VTH 0x20
#define USBFS_CR_VBUS_VTH 0x10
#define USBFS_CR_OTG_EN 0x08
#define USBFS_CR_IDPU 0x04
#define USBFS_CR_CHARGE_VBUS 0x02
#define USBFS_CR_DISCHAR_VBUS 0x01
/* R32_USB_OTG_SR */
#define USBFS_SR_ID_DIG 0x08
#define USBFS_SR_SESS_END 0x04
#define USBFS_SR_SESS_VLD 0x02
#define USBFS_SR_VBUS_VLD 0x01
/* R8_UDEV_CTRL */
#define USBFS_UD_PD_DIS 0x80 // disable USB UDP/UDM pulldown resistance: 0=enable pulldown, 1=disable
#define USBFS_UD_DP_PIN 0x20 // ReadOnly: indicate current UDP pin level
#define USBFS_UD_DM_PIN 0x10 // ReadOnly: indicate current UDM pin level
#define USBFS_UD_LOW_SPEED 0x04 // enable USB physical port low speed: 0=full speed, 1=low speed
#define USBFS_UD_GP_BIT 0x02 // general purpose bit
#define USBFS_UD_PORT_EN 0x01 // enable USB physical port I/O: 0=disable, 1=enable
/* R8_UEP4_1_MOD */
#define USBFS_UEP1_RX_EN 0x80 // enable USB endpoint 1 receiving (OUT)
#define USBFS_UEP1_TX_EN 0x40 // enable USB endpoint 1 transmittal (IN)
#define USBFS_UEP1_BUF_MOD 0x10 // buffer mode of USB endpoint 1
#define USBFS_UEP4_RX_EN 0x08 // enable USB endpoint 4 receiving (OUT)
#define USBFS_UEP4_TX_EN 0x04 // enable USB endpoint 4 transmittal (IN)
#define USBFS_UEP4_BUF_MOD 0x01
/* R8_UEP2_3_MOD */
#define USBFS_UEP3_RX_EN 0x80 // enable USB endpoint 3 receiving (OUT)
#define USBFS_UEP3_TX_EN 0x40 // enable USB endpoint 3 transmittal (IN)
#define USBFS_UEP3_BUF_MOD 0x10 // buffer mode of USB endpoint 3
#define USBFS_UEP2_RX_EN 0x08 // enable USB endpoint 2 receiving (OUT)
#define USBFS_UEP2_TX_EN 0x04 // enable USB endpoint 2 transmittal (IN)
#define USBFS_UEP2_BUF_MOD 0x01 // buffer mode of USB endpoint 2
/* R8_UEP5_6_MOD */
#define USBFS_UEP6_RX_EN 0x80 // enable USB endpoint 6 receiving (OUT)
#define USBFS_UEP6_TX_EN 0x40 // enable USB endpoint 6 transmittal (IN)
#define USBFS_UEP6_BUF_MOD 0x10 // buffer mode of USB endpoint 6
#define USBFS_UEP5_RX_EN 0x08 // enable USB endpoint 5 receiving (OUT)
#define USBFS_UEP5_TX_EN 0x04 // enable USB endpoint 5 transmittal (IN)
#define USBFS_UEP5_BUF_MOD 0x01 // buffer mode of USB endpoint 5
/* R8_UEP7_MOD */
#define USBFS_UEP7_RX_EN 0x08 // enable USB endpoint 7 receiving (OUT)
#define USBFS_UEP7_TX_EN 0x04 // enable USB endpoint 7 transmittal (IN)
#define USBFS_UEP7_BUF_MOD 0x01 // buffer mode of USB endpoint 7
/* R8_UEPn_TX_CTRL */
#define USBFS_UEP_T_AUTO_TOG 0x08 // enable automatic toggle after successful transfer completion on endpoint 1/2/3: 0=manual toggle, 1=automatic toggle
#define USBFS_UEP_T_TOG 0x04 // prepared data toggle flag of USB endpoint X transmittal (IN): 0=DATA0, 1=DATA1
#define USBFS_UEP_T_RES_MASK 0x03 // bit mask of handshake response type for USB endpoint X transmittal (IN)
#define USBFS_UEP_T_RES_ACK 0x00
#define USBFS_UEP_T_RES_NONE 0x01
#define USBFS_UEP_T_RES_NAK 0x02
#define USBFS_UEP_T_RES_STALL 0x03
// bUEP_T_RES1 & bUEP_T_RES0: handshake response type for USB endpoint X transmittal (IN)
// 00: DATA0 or DATA1 then expecting ACK (ready)
// 01: DATA0 or DATA1 then expecting no response, time out from host, for non-zero endpoint isochronous transactions
// 10: NAK (busy)
// 11: STALL (error)
// host aux setup
/* R8_UEPn_RX_CTRL, n=0-7 */
#define USBFS_UEP_R_AUTO_TOG 0x08 // enable automatic toggle after successful transfer completion on endpoint 1/2/3: 0=manual toggle, 1=automatic toggle
#define USBFS_UEP_R_TOG 0x04 // expected data toggle flag of USB endpoint X receiving (OUT): 0=DATA0, 1=DATA1
#define USBFS_UEP_R_RES_MASK 0x03 // bit mask of handshake response type for USB endpoint X receiving (OUT)
#define USBFS_UEP_R_RES_ACK 0x00
#define USBFS_UEP_R_RES_NONE 0x01
#define USBFS_UEP_R_RES_NAK 0x02
#define USBFS_UEP_R_RES_STALL 0x03
// RB_UEP_R_RES1 & RB_UEP_R_RES0: handshake response type for USB endpoint X receiving (OUT)
// 00: ACK (ready)
// 01: no response, time out to host, for non-zero endpoint isochronous transactions
// 10: NAK (busy)
// 11: STALL (error)
/* R8_UHOST_CTRL */
#define USBFS_UH_PD_DIS 0x80 // disable USB UDP/UDM pulldown resistance: 0=enable pulldown, 1=disable
#define USBFS_UH_DP_PIN 0x20 // ReadOnly: indicate current UDP pin level
#define USBFS_UH_DM_PIN 0x10 // ReadOnly: indicate current UDM pin level
#define USBFS_UH_LOW_SPEED 0x04 // enable USB port low speed: 0=full speed, 1=low speed
#define USBFS_UH_BUS_RESET 0x02 // control USB bus reset: 0=normal, 1=force bus reset
#define USBFS_UH_PORT_EN 0x01 // enable USB port: 0=disable, 1=enable port, automatic disabled if USB device detached
/* R32_UH_EP_MOD */
#define USBFS_UH_EP_TX_EN 0x40 // enable USB host OUT endpoint transmittal
#define USBFS_UH_EP_TBUF_MOD 0x10 // buffer mode of USB host OUT endpoint
// bUH_EP_TX_EN & bUH_EP_TBUF_MOD: USB host OUT endpoint buffer mode, buffer start address is UH_TX_DMA
// 0 x: disable endpoint and disable buffer
// 1 0: 64 bytes buffer for transmittal (OUT endpoint)
// 1 1: dual 64 bytes buffer by toggle bit bUH_T_TOG selection for transmittal (OUT endpoint), total=128bytes
#define USBFS_UH_EP_RX_EN 0x08 // enable USB host IN endpoint receiving
#define USBFS_UH_EP_RBUF_MOD 0x01 // buffer mode of USB host IN endpoint
// bUH_EP_RX_EN & bUH_EP_RBUF_MOD: USB host IN endpoint buffer mode, buffer start address is UH_RX_DMA
// 0 x: disable endpoint and disable buffer
// 1 0: 64 bytes buffer for receiving (IN endpoint)
// 1 1: dual 64 bytes buffer by toggle bit bUH_R_TOG selection for receiving (IN endpoint), total=128bytes
/* R16_UH_SETUP */
#define USBFS_UH_PRE_PID_EN 0x0400 // USB host PRE PID enable for low speed device via hub
#define USBFS_UH_SOF_EN 0x0004 // USB host automatic SOF enable
/* R8_UH_EP_PID */
#define USBFS_UH_TOKEN_MASK 0xF0 // bit mask of token PID for USB host transfer
#define USBFS_UH_ENDP_MASK 0x0F // bit mask of endpoint number for USB host transfer
/* R8_UH_RX_CTRL */
#define USBFS_UH_R_AUTO_TOG 0x08 // enable automatic toggle after successful transfer completion: 0=manual toggle, 1=automatic toggle
#define USBFS_UH_R_TOG 0x04 // expected data toggle flag of host receiving (IN): 0=DATA0, 1=DATA1
#define USBFS_UH_R_RES 0x01 // prepared handshake response type for host receiving (IN): 0=ACK (ready), 1=no response, time out to device, for isochronous transactions
/* R8_UH_TX_CTRL */
#define USBFS_UH_T_AUTO_TOG 0x08 // enable automatic toggle after successful transfer completion: 0=manual toggle, 1=automatic toggle
#define USBFS_UH_T_TOG 0x04 // prepared data toggle flag of host transmittal (SETUP/OUT): 0=DATA0, 1=DATA1
#define USBFS_UH_T_RES 0x01 // expected handshake response type for host transmittal (SETUP/OUT): 0=ACK (ready), 1=no response, time out from device, for isochronous transactions
/*******************************************************************************/
/* Struct Definition */
/* USB Setup Request */
typedef struct __attribute__((packed)) _USB_SETUP_REQ
{
uint8_t bRequestType;
uint8_t bRequest;
uint16_t wValue;
uint16_t wIndex;
uint16_t wLength;
} USB_SETUP_REQ, *PUSB_SETUP_REQ;
/* USB Device Descriptor */
typedef struct __attribute__((packed)) _USB_DEVICE_DESCR
{
uint8_t bLength;
uint8_t bDescriptorType;
uint16_t bcdUSB;
uint8_t bDeviceClass;
uint8_t bDeviceSubClass;
uint8_t bDeviceProtocol;
uint8_t bMaxPacketSize0;
uint16_t idVendor;
uint16_t idProduct;
uint16_t bcdDevice;
uint8_t iManufacturer;
uint8_t iProduct;
uint8_t iSerialNumber;
uint8_t bNumConfigurations;
} USB_DEV_DESCR, *PUSB_DEV_DESCR;
/* USB Configuration Descriptor */
typedef struct __attribute__((packed)) _USB_CONFIG_DESCR
{
uint8_t bLength;
uint8_t bDescriptorType;
uint16_t wTotalLength;
uint8_t bNumInterfaces;
uint8_t bConfigurationValue;
uint8_t iConfiguration;
uint8_t bmAttributes;
uint8_t MaxPower;
} USB_CFG_DESCR, *PUSB_CFG_DESCR;
/* USB Interface Descriptor */
typedef struct __attribute__((packed)) _USB_INTERF_DESCR
{
uint8_t bLength;
uint8_t bDescriptorType;
uint8_t bInterfaceNumber;
uint8_t bAlternateSetting;
uint8_t bNumEndpoints;
uint8_t bInterfaceClass;
uint8_t bInterfaceSubClass;
uint8_t bInterfaceProtocol;
uint8_t iInterface;
} USB_ITF_DESCR, *PUSB_ITF_DESCR;
/* USB Endpoint Descriptor */
typedef struct __attribute__((packed)) _USB_ENDPOINT_DESCR
{
uint8_t bLength;
uint8_t bDescriptorType;
uint8_t bEndpointAddress;
uint8_t bmAttributes;
uint8_t wMaxPacketSizeL;
uint8_t wMaxPacketSizeH;
uint8_t bInterval;
} USB_ENDP_DESCR, *PUSB_ENDP_DESCR;
/* USB Configuration Descriptor Set */
typedef struct __attribute__((packed)) _USB_CONFIG_DESCR_LONG
{
USB_CFG_DESCR cfg_descr;
USB_ITF_DESCR itf_descr;
USB_ENDP_DESCR endp_descr[ 1 ];
} USB_CFG_DESCR_LONG, *PUSB_CFG_DESCR_LONG;
/* USB HUB Descriptor */
typedef struct __attribute__((packed)) _USB_HUB_DESCR
{
uint8_t bDescLength;
uint8_t bDescriptorType;
uint8_t bNbrPorts;
uint8_t wHubCharacteristicsL;
uint8_t wHubCharacteristicsH;
uint8_t bPwrOn2PwrGood;
uint8_t bHubContrCurrent;
uint8_t DeviceRemovable;
uint8_t PortPwrCtrlMask;
} USB_HUB_DESCR, *PUSB_HUB_DESCR;
/* USB HID Descriptor */
typedef struct __attribute__((packed)) _USB_HID_DESCR
{
uint8_t bLength;
uint8_t bDescriptorType;
uint16_t bcdHID;
uint8_t bCountryCode;
uint8_t bNumDescriptors;
uint8_t bDescriptorTypeX;
uint8_t wDescriptorLengthL;
uint8_t wDescriptorLengthH;
} USB_HID_DESCR, *PUSB_HID_DESCR;
/* USB UDisk */
typedef struct __attribute__((packed)) _UDISK_BOC_CBW
{
uint32_t mCBW_Sig;
uint32_t mCBW_Tag;
uint32_t mCBW_DataLen;
uint8_t mCBW_Flag;
uint8_t mCBW_LUN;
uint8_t mCBW_CB_Len;
uint8_t mCBW_CB_Buf[ 16 ];
} UDISK_BOC_CBW, *PXUDISK_BOC_CBW;
/* USB UDisk */
typedef struct __attribute__((packed)) _UDISK_BOC_CSW
{
uint32_t mCBW_Sig;
uint32_t mCBW_Tag;
uint32_t mCSW_Residue;
uint8_t mCSW_Status;
} UDISK_BOC_CSW, *PXUDISK_BOC_CSW;
/* Peripheral USB OTG FS */
#define __IO volatile
/* USBFS Registers */
typedef struct {
__IO uint8_t BASE_CTRL;
__IO uint8_t UDEV_CTRL;
__IO uint8_t INT_EN;
__IO uint8_t DEV_ADDR;
__IO uint8_t Reserve0;
__IO uint8_t MIS_ST;
__IO uint8_t INT_FG;
__IO uint8_t INT_ST;
__IO uint32_t RX_LEN;
__IO uint8_t UEP4_1_MOD;
__IO uint8_t UEP2_3_MOD;
__IO uint8_t UEP5_6_MOD;
__IO uint8_t UEP7_MOD;
__IO uint32_t UEP0_DMA;
__IO uint32_t UEP1_DMA;
__IO uint32_t UEP2_DMA;
__IO uint32_t UEP3_DMA;
__IO uint32_t UEP4_DMA;
__IO uint32_t UEP5_DMA;
__IO uint32_t UEP6_DMA;
__IO uint32_t UEP7_DMA;
__IO uint16_t UEP0_TX_LEN;
__IO uint8_t UEP0_TX_CTRL;
__IO uint8_t UEP0_RX_CTRL;
__IO uint16_t UEP1_TX_LEN;
__IO uint8_t UEP1_TX_CTRL;
__IO uint8_t UEP1_RX_CTRL;
__IO uint16_t UEP2_TX_LEN;
__IO uint8_t UEP2_TX_CTRL;
__IO uint8_t UEP2_RX_CTRL;
__IO uint16_t UEP3_TX_LEN;
__IO uint8_t UEP3_TX_CTRL;
__IO uint8_t UEP3_RX_CTRL;
__IO uint16_t UEP4_TX_LEN;
__IO uint8_t UEP4_TX_CTRL;
__IO uint8_t UEP4_RX_CTRL;
__IO uint16_t UEP5_TX_LEN;
__IO uint8_t UEP5_TX_CTRL;
__IO uint8_t UEP5_RX_CTRL;
__IO uint16_t UEP6_TX_LEN;
__IO uint8_t UEP6_TX_CTRL;
__IO uint8_t UEP6_RX_CTRL;
__IO uint16_t UEP7_TX_LEN;
__IO uint8_t UEP7_TX_CTRL;
__IO uint8_t UEP7_RX_CTRL;
__IO uint32_t Reserve1;
__IO uint32_t OTG_CR;
__IO uint32_t OTG_SR;
} USBFSD_TypeDef;
typedef struct {
__IO uint8_t BASE_CTRL;
__IO uint8_t HOST_CTRL;
__IO uint8_t INT_EN;
__IO uint8_t DEV_ADDR;
__IO uint8_t Reserve0;
__IO uint8_t MIS_ST;
__IO uint8_t INT_FG;
__IO uint8_t INT_ST;
__IO uint16_t RX_LEN;
__IO uint16_t Reserve1;
__IO uint8_t Reserve2;
__IO uint8_t HOST_EP_MOD;
__IO uint16_t Reserve3;
__IO uint32_t Reserve4;
__IO uint32_t Reserve5;
__IO uint32_t HOST_RX_DMA;
__IO uint32_t HOST_TX_DMA;
__IO uint32_t Reserve6;
__IO uint32_t Reserve7;
__IO uint32_t Reserve8;
__IO uint32_t Reserve9;
__IO uint32_t Reserve10;
__IO uint16_t Reserve11;
__IO uint16_t HOST_SETUP;
__IO uint8_t HOST_EP_PID;
__IO uint8_t Reserve12;
__IO uint8_t Reserve13;
__IO uint8_t HOST_RX_CTRL;
__IO uint16_t HOST_TX_LEN;
__IO uint8_t HOST_TX_CTRL;
__IO uint8_t Reserve14;
__IO uint32_t Reserve15;
__IO uint32_t Reserve16;
__IO uint32_t Reserve17;
__IO uint32_t Reserve18;
__IO uint32_t Reserve19;
__IO uint32_t OTG_CR;
__IO uint32_t OTG_SR;
} USBFSH_TypeDef;
#define USBFS_BASE ((uint32_t)0x50000000)
#define USBFSD ((USBFSD_TypeDef *)USBFS_BASE)
#define USBFSH ((USBFSH_TypeDef *)USBFS_BASE)
#ifdef __cplusplus
};
#endif
#endif /*_CH32V20X_USB_H */